IETE-template-Technical-Review.docx

一季微光

爱国守法，明礼诚信，团结友善，勤俭自强，敬业奉献

IETE-template-Technical-Review.docx

Template for submission of papers to IETE Technical Review

First . Author, Second . Author, Third . Author

F. Author is with the National Institute of Standards and Technology, Boulder, CO 80305 USA (corresponding author to provide phone: 303-555-5555; fax: 303-555-5555; e-mail: author@ boulder.nist.gov).

S. Author, Jr., was with Rice University, Houston, TX 77005 USA. He is now with the Department of Physics, Colorado State University, Fort Collins, CO 80523 USA (e-mail: author@lamar.colostate.edu).

T. Author is with the Electrical Engineering Department, University of Colorado, Boulder, CO 80309 USA, on leave from the National Research Institute for Metals, Tsukuba, Japan (e-mail: author@nrim.go.jp).

ABSTRACT

Fill the text from your manuscript in different sections as shown below. Fill the text from your manuscript in different sections as shown below. Fill the text from your manuscript in different sections as shown below. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections.

Keywords:

About six to fifteen key words or phrases in alphabetical order, separated by commas. For a list of suggested keywords, visit http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt

INTRODUCTION

Section two
1. Sub-section Head Style

1. Sub-section Head Style

Fill the text from your manuscript in different sections.

1. Sub-section Head Style

Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections

1. 1. Sub-section Head Style

2.3.2 Sub-section Head Style

1. Sub-section Head Style

Section Head

Section Head

Section head
1. Sub-section Head Style

1. Sub-section Head Style

1. 1. Sub-sub-Section Head Style

1. Sub-sub Section Head Style

Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections.

Be aware of the different meanings of the homophones “affect” (usually a verb) and “effect” (usually a noun), “complement” and “compliment,” “discreet” and “discrete,” “principal” (e.g., “principal investigator”) and “principle” (e.g., “principle of measurement”). Do not confuse “imply” and “infer.”

Prefixes such as “non,” “sub,” “micro,” “multi,” and “ultra” are not independent words; they should be joined to the words they modify, usually without a hyphen. There is no period after the “et” in the Latin abbreviation “et al.” (it is also italicized). The abbreviation “i.e.,” means “that is,” and the abbreviation “e.g.,” means “for example” (these abbreviations are not italicized).

Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections.

Section Head

Section Head

Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections.

Conclusion

A conclusion section is not required. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions.

Appendix

Appendixes, if needed, appear before the acknowledgment.

Acknowledgment

Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections. Fill the text from your manuscript in different sections.

References

G. Marchesini, S. Karni, and N. Ahmed, “On obtaining transfer functions from gain-function derivatives,” IEEE

Trans. Autom. Control AC, Vol. 12, pp. 229-230, Apr. 1967.

6. M. R. Chidambara, “Two simple techniques for the simplification of large dynamic systems,” JACC, Vol. 1, pp. 669-674, Dec. 1969.

7. Y. Shamash, “Stable reduced-order models using Pade type approximation,” IEEE Trans. Autom. Control, Vol. 19, no. 5, pp. 615-616, Oct.1974.

8. M. Hutton, and B. Friedland, “Routh approximations for reducing order of linear, time-invariant systems,” IEEE Trans. Autom. Control, Vol. 20, no. 3, pp. 329-337, Jun. 1975.

9. T. C. Chen, C. Y. Chang, and K. W. Han, “Reduction of transfer functions by the stability equation method,” J. Franklin Inst., Vol. 308, pp. 389-404, Oct. 1979.

10. Y. Bistritz, and G. Langholz, “Model reduction by Chebyshev polynomial techniques,” IEEE Trans. autom. Contr. AC Vol. 24, pp. 741-747, Oct. 1979.

11. T. N. Lucas, “Factor division: A useful algorithm in model reduction,” IEE Proc. Vol. 130, no. 6, pp. 362-364, November 1983.

12. R. Prasad, J. Pal, and A. K. Pant, “Multivariable system approximation using polynomial derivatives,” J. Inst. Eng., India IE(I), Vol. 76, pp. 186-188, Nov. 1995.

13. D. A. Wilson, “Optimal solution of model reduction problem,” Proc. Inst. Electr. Eng., Vol. 117, no. 6, pp. 1161-1165, Jun. 1970.

First A. Author and the other authors are required to include biographies, not more than 250 words (do not mention year of birth) and recent photos at the end of regular paper.

Authors should not give their Degrees (Mr/Mrs, Dr, Prof etc) or positions (All military ranks) before the name anywhere in the manuscript.

2. Y. S. Lin and D. Sylvester, “Runtime leakage power estimation

technique for combinational circuits,” in Proceedings

of the Asia and South Pacific Design Automation Conference,

Yokohama, 2007, pp. 660-665.

3. S. K. Kumar, S. Kaundinya, S. Kundu, and S. Chattopadhyay,

“Particle swarm optimization based pattern reordering

for low power testing,” in Proceedings of the

International Conference on Computing, Communication

and Networking Technologies, Tamil Nadu, 2010, pp. 1-5.

4. V. Sheshadri, V. D. Agrawal, and P. Agrawal, “Optimal

power-constrained SOC test schedules with customizable

clock rates,” in Proceedings of the IEEE International

SOC Conference, Niagara Falls, New York, 2012,

pp. 271-276.

5. H. Zhiyun, P. Zebo, and P. Eles, “Multi-temperature testing

for core-based system-on-chip,” in Proceedings of the

Design, Automation & Test in Europe Conference & Exhibition,

Dresden, 2010, pp. 208-213.

Manuscripts should be limited up to 10 pages in IETE TR format, including figures, references, author biographies and photos. After final checks, if the typeset manuscript exceeds 06 pages length, the authors will be charged Rs 1000/- (for Indian authors) and USD 50 (for other authors) for each extra journal page.

Link for guidelines: http://tandfonline.com/action/authorSubmission?journalCode=titr20&page=instructions#.VsbrV7R961s

浏览 2.6K

一季微光

6

198

最新资料 上传

IETE-template-Technical-Review.docx

最新资料上传